Associated RC10GT Brushless Conversion ROLLER

Description

PRE-OWNED. Condition is used, worn, but not wore out. DOES NOT INCLUDE BATTERY, ESC, MOTOR or SERVO. Includes two well used but serviceable nitro bodies adapted to electric truck use. Roller comes with set of four AE bng/pin FR wheels and pin drive RR wheels. One FR wheel has a piece missing (see photos), but no cracks and has served on the truck for three back yard grass track oval racing series. Tires are vintage AE rib FR and X-pin RR (unmounted). Wheels are AE vented; tires are not vented. Clean, dry well used inserts included. Truck came to me off Ebay as a complete nitro. No additional holes or cuts by me made to the chassis for brushless conversion. Possibly a cut away by previous owner on the Lft RR for nitro engine clearance. Dunno. My shop made a set of spacer tubes and plates to raise the tranny for electric motor to clear chassis plate. 32P gearing retained. Spur gear included. Workshop fabricated and fitted a Lexan finger and stone guard affixed to top of tranny. Easily removed. There are two (I think, but no more) partially stripped threads holding the tranny in place. Never gave me any issue. Other than they won't tighten securely. DuraTrax body posts at FR. Stainless steel nuts on the body posts are for ballast weight-easily removeable. Good shocks and springs all four corners. Fairly fresh Losi 30wt oil. DuraTrax body posts and fiberglass strap serve as battery hold down. Neoprene cushion glued to chassis plate and lip. Battery used was 2s x 4600 LiPo 'Shorty' mounted on edge (NOT INCLUDED). Used existing AE holes in chassis plate. NO new holes were drilled. AE servo mounts included and attached to chassis. CV RR axles. All in all a good roller with lots of racing life left. Practically unbeatable on my little back yard oval. Ships UPS ground in 1-3 days after purchase.