LED Light Kit Brake + Headlight + Signal 2.4ghz PPM FM For HSP RC 1/10 Car Truck

Description

Product Features
12 LED Multi-color RC Car Flashing LED Light Lamp, Easy to install,4 Modes, Settings according to your preferences.
Low power consumption. Light weight.
Mode 1: all car led is on.
Mode 2: The front LED→the white light is flashing quickly, the blue light is always on. The back LED→the white light is always on, the yellow and red lights are flashing quickly.
Mode 3: The front LED→the white and blue lights are flashing at the highest speed in a loop. The back LED→the white yellow red lights are flashing at the highest speed.
Mode 4: The front LED→the white light is always on, the yellow light is flashing slowly. The back LED→the white and yellow lights are flashing at the same time, and they are flashing red light alternatively.
Turn Signals work when you turn your RC.
Brake Lights work, when you Brake your RC.
Easy change mode button.
Note
1.Please read our manual carefully before installing the product.
2.Do not use a power supply that exceeds the safe voltage.
3. To avoid short circuits, avoid flooding the lights during use.
Product Specification
Type     RC 12 LED Light Kit
Input Voltage     4.8 - 6V DC
Working Current     100mA
LED Wire     about 350mm
Control Wire     about 280mm
Power Core Connection Wire     about 200mm
Dimensions (Control Box)     about1.77x1.18x0.47in(47x30x12mm)
Package Included
1 x Control box
6 x White LED light
2 x Blue LED light
2 x Yellow LED light
2 x Red LED light
12 x Car LED holder
1 x Power connection cable
How To Use
1.Select RC car body and mount the LED holder on the RC car body.
2.Insert the LED into the LED holder.
3.According to the instructions, connect each LED to the plug in the corresponding control box
4.Stick the main control box to the top of the car correctly.
5.Wrap the led wire to prevent the wire and wheel from getting entangled.
6.Fix all wires and check whether they are set correctly.
7.Led could be installed flexibly, according to your preference.